Safety precautions for the oxygen 三公

　　1.The oxygen 三公 shall be reliably grounded. The structure of the explosion-proof wall shall be used as the standard between the oxygen 三公 and the filling part. Before operating this machine, ensure that all parts mounted on the machine tool are strictly degremed (antioxidants are required for bearings) and all joints and accessories are locked.

　　2.Hyperbaric oxygen and electricity are dangerous! The unit can be maintained or maintained while ensuring that the power is cut off and that the compressed gas is discharged throughout the oxygen 三公 system.

　　3.In the operation of the unit, do not release or remove any pipe fittings and mechanical parts; the unit is filled with high pressure and high temperature oxygen, which can cause serious safety accidents.

　　4.The main unit and the fan must be in the correct rotation direction, otherwise it will cause a blasting accident.

　　5.When it is connected to the power cord of the 三公, it is necessary to install a suitable air switch and to connect a suitable ground wire. Is required during 三公 operation is well ventilated, ambient temperature below 35℃, and necessary maintenance revolves around the machine space required.

　　6.The 三公 can not exhaust the pressure more than the nameplate work. Otherwise, the force of the 三公 components will deteriorate, the exhaust temperature will be too high, and the motor will overload. As a result, the 三公 parts will be damaged, the service life will be shortened, and the machine will be turned off. Such anomalies, and even serious safety accidents。

　　7.The safety valve in the oxygen 三公 is the safety barrier for the machine. Should be checked at least once a year to the local labor department. When the gas pressure in the system exceeds the rated pressure, the relief valve opens to release the gas. At this point, it is necessary to check the cause of the overpressure; the 三公 can be used behind again.

　　8.For any maintenance of the oxygen 三公, the following tasks must be done：

　　Stop the unit; cut off the power to ensure the 三公 is off; ensure that the compressed gas in the unit has been drained; any parts assembled parts must be strictly skim.

　　9.Personal Protection: In the operation of oxygen 三公, personnel and clothing should be far from moving parts such as 三公 pulley, blades, belts, etc., and cannot directly touch the cylinder and pipe to avoid burns; the operator should have relevant professional knowledge and experience.

　　10.Exclusive drive oxygen 三公 before the above instructions.